The transcranial direct stimulation process is one that has been in existence for quite some time now. It was initially designed to help the patients who had some severe brain injuries such as strokes. It has however been advanced over the years to help with other various effects. If you are wondering what this process is, or what it generally entails, then you are in the right place. The tdcs uses direct current from a powered device to pass some current through the brain of a patient. The current is passed using some electrodes placed on the scalp of the patient.
The practice was first designed to help people diagnosed with brain injuries such as stroke in their therapy. It has however been advanced over the years to help with other various activities. This includes; improving attention span, increasing problem solving ability and reducing memory loss among others. The different effects can be achieved by placing the electrodes at different locations of the head. This leads to the stimulation of different neurons and hence different result are attained. The practice has been proven to be safe for use provided safety protocols are followed.
The treatment simply works by allowing current to pass from one end on the head to the other. This is enabled by the use of a positively charged electrode and a negatively charged one. The electrodes are directed to regions where if the current flows from them and into the brain, it will reach the desired electrodes. The therapist should carefully place them at designated points. Failure to this, different results will be obtained rather than the expected.
The current passed through these neurons is meant to increase their excitement or reduce it. By passing the current from an anode which is the positively charged electrode will lead to an excitement of the neurons. This makes them to be more active and hence the patient will be active in some activities. If the current is passed from the cathode which is negatively charged, the neurons excitement is reduced and thus they become less active.
The process is quite easy and simple to set up provided that you have all the necessary equipment and skills needed to conduct it. First you need a power source that can deliver you direct constant current throughout the procedure. You also need an anode and cathode electrodes which are positively and negatively charged respectively. The electrodes should have pads that enable you to place them correctly and effectively on the scalp of a patient.
The skin where the pads will be placed should be cleaned and prepared well. This enables the pads to create a good connection to the skin. The pads should be small in size to ensure that they are more focused to the point of stimulation.
One electrode should be placed at the point that needs stimulation and the other on the opposite side of it. The device is then turned on and current let to flow through for some timed period. It can be increased gradually if necessary.
In recent times, the therapy has adopted the use of several electrodes for the process other than just the common type that uses two. This ensures optimal simulation. In the end, long lasting and more effective results are achieved.
The practice was first designed to help people diagnosed with brain injuries such as stroke in their therapy. It has however been advanced over the years to help with other various activities. This includes; improving attention span, increasing problem solving ability and reducing memory loss among others. The different effects can be achieved by placing the electrodes at different locations of the head. This leads to the stimulation of different neurons and hence different result are attained. The practice has been proven to be safe for use provided safety protocols are followed.
The treatment simply works by allowing current to pass from one end on the head to the other. This is enabled by the use of a positively charged electrode and a negatively charged one. The electrodes are directed to regions where if the current flows from them and into the brain, it will reach the desired electrodes. The therapist should carefully place them at designated points. Failure to this, different results will be obtained rather than the expected.
The current passed through these neurons is meant to increase their excitement or reduce it. By passing the current from an anode which is the positively charged electrode will lead to an excitement of the neurons. This makes them to be more active and hence the patient will be active in some activities. If the current is passed from the cathode which is negatively charged, the neurons excitement is reduced and thus they become less active.
The process is quite easy and simple to set up provided that you have all the necessary equipment and skills needed to conduct it. First you need a power source that can deliver you direct constant current throughout the procedure. You also need an anode and cathode electrodes which are positively and negatively charged respectively. The electrodes should have pads that enable you to place them correctly and effectively on the scalp of a patient.
The skin where the pads will be placed should be cleaned and prepared well. This enables the pads to create a good connection to the skin. The pads should be small in size to ensure that they are more focused to the point of stimulation.
One electrode should be placed at the point that needs stimulation and the other on the opposite side of it. The device is then turned on and current let to flow through for some timed period. It can be increased gradually if necessary.
In recent times, the therapy has adopted the use of several electrodes for the process other than just the common type that uses two. This ensures optimal simulation. In the end, long lasting and more effective results are achieved.
Posts
Registration of your site
0 commentaires:
Post a Comment